A: Sheet metal: when the car body has a recess, it is necessary to disassemble the recessed part
and shape it with a sheet metal hammer.
B: Epoxy Primer: Epoxy primer can only be sprayed on the surface of the car where bare metal is
present, which can effectively prevent surface metal oxidation.
DIRECTIONS:
1: Clean & Shade
Remove wax, oil and other impurities with deoiling detergent. Examine and asses the location and extent of damage.
2: Grind damaged parts
Grinding with abrasive paper(#80-#2000), dry grinding with sandpaper(#80,120,180) first.
3: Dust cleaning
Use a degreaser to remove grease from the workpiece.
4: Fill & Grind
Add the hardener in proportion. mix and fill the putty, Sanding(#80, 120, 180) after drying.
5: Clean & Grind
Clean the surface again, and then finely grind the filling to the level of the paint.
6: Spray primer surfacer
Mix and spray primer according to product requirements, each layer needs to be matte.
7: Grind primer surfacer
After the primer is dried, dry sanding paper(#320-400) is used with a two-way sander. Manual grinding
8: Clean & Wipe
Usea cleaner to clean the grease. and tack cloth to clear of dust.
9: Spray 1K Color paint
Add thinner as required, spray 2-3 layers, spray interval of 5-10 minutes per layer.
10: Spray Clear coat
Add hardener and thinner as required, spray two layers, each interval is 5-10 minutes.
11: Dry & Bake
After the clear coat is sprayed, it needs to be allowed to stand for 10-15 minutes, can be baked or dried naturally.
12: Waxing & Polish
Can be sanded with abrasive paper(#2000) first if necessary. then use related products for waxing and polishing.
Your message must be between 20-3,000 characters!
